Can Fan Temperature Control
Made in Germany. Thermally protected plastic housing. Ideal for use with carbon filters or any situation where you need to push or pull a large volume of air through long lengths of ducting.
The Swiss-made motor, together with the propeller design is enabling this type of fan, to deliver a strong airflow while making less noise.
Thermostat control allows you to set a desired temperature on the fan unit. The fan speed will decrease or increase to maintain that temperature allowing the fan to run quieter when full power is not needed.
This fan has 3 speed levels controlled by the thermostat. The temperature is read from the air moving through the fan. NOTE: Can take five minutes before fan speed changes.
The sensor checks the temperature every 2 minutes. If it is below the set point by 1 degree it will reduce down one step until it reaches step 1 then it will remain. If the temperature is above the set point by 2 degrees it will move up to the next step until it reaches step 3 then it will remain.
A quality fan. Long-lasting and reliable. Ideal with Carbon filters.
150 mm diameter 460m³/h 60 watts
200 mm diameter 840m³/h 127 watts
250 mm diameter 830m³/h 165 watts